Messner Pond Pumps — Power Tec2

Messner Power Tec2 pump range
Messner Power Tec2 pumps are powered by a reliable Asynchronous motor. The rotor is encapsulated by a stainless steel "can". This means no seals are required to keep liquids from the motor coil. These higher pressure pumps utilise hydraulically optimised impellers. These pumps are reliable epoxy encapsulated units ideally suited to continuously powering large fountains, waterfalls and streams. The pumps can be coupled to an intake filter or mounted outside the pond with Messners own Filter Screen modules (available separately). A selection of hose conections are also provided in the package.

Messner Pond Pumps - Power Tec2 | |||||
---|---|---|---|---|---|
Power Tec2-4000 | Power Tec2-6000 | Power Tec2-8000 | Power Tec2-10000 | Power Tec2-14000 | |
Litres - minute | 69 max | 103 max | 135 max | 167 max | 233 max |
Litres - hour | 4100 | 6200 | 8100 | 10000 | 14000 |
Head - metres | 4.5m | 6.0m | 6.5m | 7.0m | 8.0m |
Water Depth | The minimum permissible water depth for the pumps in this range is 250mm | ||||
Watts consumed | 80W | 100W | 150W | 190W | 280W |
Voltage | 230V / 50Hz | 230v / 50Hz | 230V / 50Hz | 230V / 50Hz | 230v / 50Hz |
Length Width Height (mm) | 240 x 145 x 195 | 240 x 145 x 195 | 240 x 145 x 195 | 240 x 145 x 195 | 240 x 145 x 195 |
Discharge / outlet | 1"BSPM - 25mm | 1"BSPM - 25mm | 1"BSPM - 25mm | 1"BSPM - 25mm | 1"BSPM - 25mm |
Suction / inlet | 1-1/4"BSPM - 32mm | 1-1/4"BSPM - 32mm | 1-1/4"BSPM - 32mm | 1-1/4"BSPM - 32mm | 1-1/4"BSPM - 32mm |
Cable Length | 10m | 10m | 10m | 10m | 10m |
Article No. | M-SUt65050 | M-SUt65051 | M-SUt65052 | M-SUt65053 | M-SUt65054 |
Warranty | 5 years, not including Rotor unit, (consumable part subject to wear) |